Commercial Garage Cabinets in Murrieta, CA
Garage Cabinets Summit Murrieta covers commercial garage cabinets, heavy-gauge steel runs, modular drawer cabinets and steel shelving, for repair bays, maintenance rooms, contractor garages and back rooms in Murrieta, CA, with a way to schedule work in a space that stays in use. Schools, public works and fire stations are outside this site.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Illustration
Four kinds of shop and storage space
Shops and storage rooms in Murrieta come in several forms. About 71 percent of homes are detached houses, so a trade or mobile service often keeps its stock in a house garage, and about 6.4 percent of housing units are in buildings of 20 or more units, which are served by maintenance rooms.
| Space | Typical need | Page |
|---|---|---|
| Auto repair bays and service departments | Tools, parts, benches at the lift | Auto shop cabinets |
| Maintenance rooms and storerooms | Parts, supplies, labeled bins | Warehouse and maintenance storage |
| Fleet and contractor garages | Van stock, tool walls, material | Fleet and contractor garages |
| Retail and office back rooms | Supplies and records in tight space | This page |
Steel, drawers or shelving
| System | Where it fits | Installed per ft |
|---|---|---|
| Heavy-gauge steel cabinets | Doors and shelves, general tool and parts storage | $180–$320 |
| Modular drawer cabinets | Small parts and hand tools, drawer after drawer | $240–$420 |
| Steel shelving with cabinets | Bulk storage with a few lockable units | $120–$240 |
The gauge of the sides and shelves, the slide rating and the lock type are the three numbers worth reading on the maker's sheet. A load figure counts only if it names the product and comes from the maker.
Anchored to the wall and to the floor
Tall units in a shop get bumped, loaded unevenly and sometimes leaned on. Anchoring ties them to the wall studs or masonry and, where the maker calls for it, to the floor. The estimator line is $10–$30 per ft. If the space is leased, the lease decides what may be fastened to walls and floor, a point that applies to any tenant; about 32 percent of Murrieta households rent.
Working around the business day
- Business hours, one zone at a time. One section is cleared and fitted while the rest of the space stays in use.
- After hours or on a weekend. The whole space is done when it is empty.
- Phased over several days. Parts of the space are finished in order and part stays usable.
None of these is a price on the estimator; each is a flag for the installer. Moving stock out and back is a separate line, $300–$900.
Business cabinet prices for Murrieta
| Run | Steel | Drawer | Shelving with cabinets |
|---|---|---|---|
| 40 ft | $7,200–$12,800 | $9,600–$16,800 | $4,800–$9,600 |
| Steel run | 24 ft | 40 ft | 60 ft |
|---|---|---|---|
| Standard tops | $4,320–$7,680 | $7,200–$12,800 | $10,800–$19,200 |
For a 40 ft run, heavy-duty tops add $1,200–$3,600 and anchoring $400–$1,200. A workbench is $90–$280 per ft, bins and parts drawers $200–$800 and haul-away $150–$500. Market estimates, not quotes.
Commercial Garage Cabinets — common questions
How much do commercial garage cabinets cost in Murrieta?
Heavy-gauge steel is $180–$320 per ft, modular drawers $240–$420 and shelving with cabinets $120–$240, installed in 2026. A 40 ft steel run is $7,200–$12,800.
Can the work be done while the shop is open?
Often in zones, or after hours. It is a schedule flag for the installer, not a different price.
Are schools or public works included?
No. Schools, public works and fire stations are outside this site.
Commercial Garage Cabinets: check availability and price range
Bookings aren't open yet — a typical Murrieta range in about 30 seconds.