Auto Shop Cabinets in Murrieta, CA
Garage Cabinets Summit Murrieta plans auto shop cabinets, drawer cabinets, steel benches and parts shelving, for Murrieta, CA repair bays, tire and detail shops and service departments, where the lift and the bay door decide the layout.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Illustration
Start with the lift and the door
A bay has one job: moving a vehicle and getting to its underside. Cabinets go where they do not interrupt that.
| Bay feature | Clearance question |
|---|---|
| Two-post or four-post lift | Arm swing and the side the vehicle is walked out on |
| Roll-up door | Door travel overhead and the wall beside it |
| Floor drain or trench | Cabinet feet stay out of the drain line |
| Compressor and air lines | Reel and drop locations before the run is placed |
| Fire extinguisher and exit | Always visible, never behind a cabinet |
Walls along the back and the outside of the bay carry the cabinets; the bay center stays open.
Drawers or doors
Technicians reach for small tools all day, so a modular drawer cabinet earns its price ($240–$420 per ft) in labeled drawers and foam liners. Door cabinets suit bulky parts and cleaning supplies at a lower price ($180–$320 per ft in heavy-gauge steel). A mix is common: drawers at working height under the bench, doors above.
Flammable liquids go in storage cabinets built and labeled for them; an ordinary shop cabinet is not that. The fire marshal and the maker's data decide what a shop needs.
Benches and tops in a working bay
A heavy-duty steel or maple top over the cabinets ($30–$90 per ft more) takes hammer blows and spilled oil. A bench is $90–$280 per ft. A vise on the bench is bolted through the top into the frame, not into the drywall.
Heat, dust and long days
With the roll-up door open on a 91°F July afternoon, the bay is hot and dusty. Powder-coated surfaces wipe clean, drawer slides need to be rated for use and dust, and parts that take heat (batteries, sprays) are stored per their labels.
Auto shop cabinet prices
Example: a 24 ft bay wall with modular drawer cabinets, heavy-duty tops, anchoring to wall and floor, an 8 ft bench and labeled bins.
| Line | Price |
|---|---|
| 24 ft drawer cabinets with heavy-duty tops and anchoring, $280–$540 per ft | $6,720–$12,960 |
| 8 ft workbench, $90–$280 per ft | $720–$2,240 |
| Labeled bins and parts drawers | $200–$800 |
| Total | $7,640–$16,000 |
The same 24 ft in standard heavy-gauge steel with no extras is $4,320–$7,680. Moving tools and stock out and back is $300–$900. Market estimates, not quotes.
Auto Shop Cabinets — common questions
What cabinets do repair bays use?
Modular steel drawer cabinets for small tools, doors for bulky parts and a steel-topped bench between. The mix depends on the work done in the bay.
Do cabinets go on both sides of a lift?
The wall behind and outside the bay is used; the lift's arm swing and the side the vehicle is walked out on are kept clear.
How long does an install take in a working shop?
It depends on the length of the run and the schedule picked: after hours, one zone at a time, or phased over several days.
Auto Shop Cabinets: check availability and price range
Bookings aren't open yet — a typical Murrieta range in about 30 seconds.